Grand Caravan L4-2.4L DOHC (1996)
Cruise Control Servo Cable: Service and Repair
1. Remove air cleaner assembly.
2. Disconnect cable from throttle body by removing retaining clip.
3. Disconnect cable from servo, then remove cable assembly.
4. Locate cable through servo mounting bracket.
5. Connect cable sleeve to servo stud, align holes, then install clip.
6. Insert servo studs through holes in cable and holes in bracket, then install nut-washers.
7. Route cable from servo, through cable support bracket and clip, then install cable end on stud of throttle body.
8. Replace air cleaner.
