Grand Caravan L4-2.4L DOHC (1996)
22.
Attach the elbow connector of the provided dual rollover valve- to-filler hose harness assembly to the front tank rollover valve hose. Use lubricant
to ease installation, if necessary. Then tape the hose to the tank at the front strap area (Figure 11).
23.
Attach the straight connector of the dual rollover valve-to-filler hose harness assembly to the rear tank rollover valve hose. Use lubricant to ease
installation, if necessary. Then tape the line to the fuel tank at the rear strap area (Figure 11).
24.
Using three of the provided small tie straps, fasten the two hoses of the dual rollover valve-to-filler hose harness assembly together as shown in
Figure 11.
NOTE:
Locate the tie strap that is closest to the tank as close to the rubber inline connector as possible.
25.
Attach the provided single canister-to-filler hose onto the steel vent tube near the left frame rail. Route the vent hose along the rail and feed it
