Grand Caravan L4-2.4L DOHC (1996)
Seat Belt: Service and Repair
Seat Belt - Outboard Front
SEAT BELT-OUTBOARD FRONT
Removal
1. Remove shoulder harness height adjuster knob by pulling it straight away from adjuster.
2. Remove cover from seat belt turning loop.
3. Remove bolt holding turning loop to shoulder belt height adjuster.
4. Separate turning loop from B-pillar.
5. Remove lower B-pillar trim cover or quarter trim panel on three door left side.
6. Remove bolt holding seat belt retractor to B-pillar.
7. Lift retractor upward and disengage arrow head retainer holding retractor to B-pillar.
8. Separate seat belt from vehicle.
Installation
Reverse the preceding operation. Tighten seat belt anchor bolts to 39 Nm (29 ft. lbs.).
Seat Belt Buckle - Front Inboard
SEAT BELT BUCKLE-FRONT INBOARD
Removal
1. Remove screws holding front inboard side cover to seat cushion frame.
2. Separate side cover from vehicle.
3. Remove bolt holding seat belt buckle to front seat track.
4. Separate buckle from vehicle.
Installation
Reverse the preceding operation. Tighten seat belt anchor bolts to 39 Nm (29 ft. lbs.).
