Grand Caravan L4-2.4L DOHC (1996)
Band: Adjustments
KICKDOWN BAND
The kickdown band adjusting screw is located on the left side, top front of the transaxle case.
Fig. 4 Kickdown Band Adjustment
1. Loosen locknut and back off nut approximately five turns, Fig. 4. Ensure adjusting screw turns freely in the transaxle case.
2. Using tool No. C-3880-A and adapter tool No. C-3705, or equivalents, tighten band adjusting screw to specifications.
3. Back adjusting screw off 2 1/4 turns, then holding screw in position, tighten locknut to specifications.
LOW-REVERSE BAND
1. Loosen, then back off locknut approximately five turns.
2. Tighten adjusting screw to specifications.
3. Back adjusting screw off 3 1/2 turns, then tighten locknut to specifications.
