Grand Caravan L4-2.4L DOHC (1996)
Fig. 16 Outer CV Joint Ball Removal
10. Remove surplus grease and mark relative position of inner cross, cage and housing with a dab of paint.
11. Hold joint vertically in a soft jawed vise.
12. Press downward on one side of inner race to tilt cage and remove ball from opposite side. If joint is tight, use a suitable hammer and brass drift to
tap inner race. Do not strike cage. Repeat this step until all balls have been removed. A screwdriver may be used to pry balls loose.
13. Tilt cage assembly vertically and position two opposing, elongated cage windows in area between ball grooves.
Fig. 17 Outer CV Joint Cage & Cross Assembly Removal
14. Remove cage and inner race assembly by pulling upward from housing.
