dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Firing Order > < Idle Speed|Specifications|Page 1461
Page 1
background image

Fuel Pressure Release: Service and Repair

1.

Loosen gas cap and allow tank pressure to release.

2.

Remove wiring harness connector from any injector, then ground one injector terminal.

3.

Connect a suitable jumper wire to a second terminal, then touch the positive post of the battery for approximately 10 seconds and release system
pressure.

4.

Remove jumper wires and service fuel system as required.

Firing Order > < Idle Speed|Specifications|Page 1461