Grand Caravan V6-181 3.0L SOHC (1989)
Figure 2
8.
Position MAP sensor and bracket so that MAP sensor vacuum port points straight down. Torque nut to 25 N-m (225 in.lbs.).
9.
Disconnect the intake manifold end of the formed purge hose that extends from the intake manifold nipple to the "F" shaped connector (Figure 2).
Figure 3
10. Assemble the MAP sensor bleed/hose assembly (4669042) as shown in Figure 3. Install to nipple on intake manifold. Position the MAP bleed valve
as close to vertical as possible.
Figure 4
11. Cut the existing PVC hose as shown in Figure 2.
12. Assemble the purge jumper assembly (4669038) as shown in Figure 4. Install between the formed purge hose (disconnected in Step 9) and the PVC
hose (cut in Step 11). Connect the "Tee" end to the PVC hose and "In-line" end to the formed purge hose.
