Grand Caravan V6-181 3.0L SOHC (1989)
6. Separate outer CV joint splined shaft from hub by holding CV housing while moving knuckle/hub assembly away.
CAUTION: Do not use pry bar to separate hub from shaft or damage to outer wear sleeve on CV joint may occur.
7. Support driveshaft assembly at CV joint housing and remove by pulling outward on inner CV joint housing. Do not pull on shaft.
8. Remove driveshaft assembly from vehicle.
INSTALLATION
Caution: During any service procedures where knuckle and driveshaft are separated, clean seal and wear sleeve with suitable solvent, and apply a
suitable lubricant to both components. Solvent must not touch the boot.
