dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wiper Arm - Loose|Page 6378 > < Windshield Washer Switch|Service and Repair
Page 1
background image

Wiper Arm: Customer Interest
Wiper Arm - Loose

Models

1989 AA, AC, AH, AP & AS Bodies

Subject

Wiper Arm Loose On Pivot Shaft

Index

BODY

Date

May 22, 1989

No.

23-11-89

(C23-04-9)

P-1976
BODY CODE LEGEND

AA - SPIRIT/ACCLAIM AC - DYNASTY/NEW YORKER/LANDAU AH - LANCER/LeBARON GTS (4-DOOR HATCHBACK) AP -
SHADOW/SUNDANCE AS - CARAVAN/VOYAGER/CARAVAN C/V

SYMPTOM/CONDITION

Windshield wiper arm attachment to the pivot shaft may strip and loosen due to insufficient torque or excessive loading on wiper arm.

Loose wiper arms which have not been otherwise damaged may be reused by removing and reinstalling, using the following procedure. This will allow
the arm to re-establish a tight fit on the pivot shaft splines.

If the wiper arm is cracked or damaged, a new arm must be installed following this same procedure.

Figure 1

REPAIR PROCEDURE

1.

Lift the wiper arm and place a 1/8" (3.5 mm) pin (Allen wrench, nail, etc.) into the arm pin hole (see Figure 1).

Wiper Arm - Loose|Page 6378 > < Windshield Washer Switch|Service and Repair