Grand Caravan V6-3.3L Flex Fuel (2008)
Sliding Door Handle: Service and Repair
Actuator-Inside Handle
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel.See: Sliding Door Interior Trim Panel/Service and Repair/Sliding Door Trim Panel/Removal.
3. Remove the door module assembly.See: Power Sliding Door Module/Service and Repair/Sliding Door Module Door - Removal.
4. Remove the locking rod bellcrank.See: Service and Repair/Removal and Replacement/Door - Sliding/Rod - Locking/Removal.
5. Disconnect the electrical connector.
6. Remove the mounting fastener.
7. Remove the actuator (2).
Installation
INSTALLATION
1. Install the actuator (2).
2. Install the mounting fasteners.
3. Connect the electrical connector.
4. Install the locking rod bellcrank.See: Service and Repair/Removal and Replacement/Door - Sliding/Rod - Locking/Installation.
5. Install the door module assembly.See: Power Sliding Door Module/Service and Repair/Sliding Door Module Door - Installation.
6. Install the door trim panel.See: Sliding Door Interior Trim Panel/Service and Repair/Sliding Door Trim Panel/Installation.
7. Connect the battery negative cable.