dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Liftgate Drive Unit - Removal|Page 10774 > < Power Liftgate Drive Unit - Removal
Page 2
background image

6. Remove the left quarter trim panel (5).

a. Remove the third row lower seat belt webbing anchor (4).
b. Remove the third row upper turning loop anchor bolt.
c. Remove the six quarter trim retaining screws.
d. Pull trim from inner quarter panel (1).
e. Disconnect the auxiliary power outlet and power inverter (2) wire harness connectors (3) (if equipped).
f.

Remove the left quarter trim panel (5).

7. If equipped, remove the subwoofer,See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and

Repair/Speaker - Removal.

8. Remove the link rod assembly from the liftgate attachment point,See: Link Rod/Removal.
9. Remove the drive unit assembly retaining bolts (4).

10. Disconnect the wire harness connector from the power liftgate drive unit assembly (3).
11. Unhook the drive unit assembly (1) from the D-pillar (2) and remove the unit from the vehicle.

Power Liftgate Drive Unit - Removal|Page 10774 > < Power Liftgate Drive Unit - Removal