dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Overhead Console|Page 10915 > < Front Overhead Console|Page 10913
Page 4
background image

4. Remove the two screws (2) holding the rear of the overhead console (3).
5. Grasp the overhead console (3) firmly and pull down on the front of the unit to unsnap the front of the console.
6. If equipped with DVD screen, disconnect the electrical connectors (1).

Long Overhead Console

LONG OVERHEAD CONSOLE

1. Disconnect and isolate the battery negative cable.
2. Using a trim stick or equivalent, gently pry off both the front (3) and rear (5) overhead console bezels.
3. Disconnect the electrical connector (2) to the front bezel (3) and remove.
4. Disconnect the electrical connector (4) to the rear bezel (5) and remove.

5. Remove the four screws (2) to the overhead console (two in the front and two in the back).
6. Grasp the overhead console (3) and give a firm tug downwards to disengage the console from the roof retainers.
7. If equipped with DVD screen, disconnect the electrical connectors (1).
8. Remove overhead console from vehicle.

Sunroof Only - Second Row Overhead Console

SUNROOF ONLY - SECOND ROW OVERHEAD CONSOLE

Front Overhead Console|Page 10915 > < Front Overhead Console|Page 10913