Grand Caravan V6-3.3L Flex Fuel (2008)
Trim Panel: Service and Repair
Removal
REMOVAL
1. Open sliding door.
2. Stow second row seats.
3. Using a trim stick or equivalent, gently pry up on rear center filler panel (3).
4. Remove the 18 nuts (2) to cover/door assembly.
NOTE: Make sure both doors are latched close. Assembly is very flexible and will break if doors are not latched. Careful when removing.
5. Remove the cover/door from vehicle.
Installation
INSTALLATION
NOTE: Make sure both doors are latched close. Assembly is very flexible and will break if doors are not latched. Careful when removing.
1. Position the cover/door in vehicle.
2. Install the 18 nuts (2) to cover/door assembly.
3. Install the rear center filler panel (3).
4. Close sliding door.
Cowl Trim - Removal
REMOVAL
