Grand Caravan V6-3.3L Flex Fuel (2008)
Power Seat Motor: Service and Repair
Power Seat Height Adjust Motor - Installation
INSTALLATION
1. Screw the height adjust motor gearbox spindle (1) in or out as necessary until the motor retaining screws (3) and spindle screw (4) holes are
aligned and all fasteners can be installed.
2. Position the height adjust motor and gearbox assembly (2) onto the seat track.
3. Install the motor retaining screws (3). Tighten the screws to 12 Nm (106 in. lbs.).
4. Install the height adjust motor gearbox spindle (1) retaining screw (4). Tighten the screw to 17 Nm (150 in. lbs.).
5. Connect the motor electrical connector.
6. Install the power seat,See: Service and Repair/Removal and Replacement/Seat - Installation.
7. Verify proper power seat operation.