Grand Caravan V6-3.3L Flex Fuel (2008)
following steps should be performed only on the seat with the inoperative seat leg latch position switch.
1. Remove the effected third row power folding seat,See: Service and Repair/Removal and Replacement/Seat - Removal.
2. Remove the seat cushion and cover assembly,See: Seat Cushion/Service and Repair/Seat Cushion / Cover - Removal.
3. Disconnect the electrical connector for the effected switch (1).
4. Using the appropriate size drill bit, remove the rivet (2) securing the switch (1) to the seat leg assembly (3).
5. Remove the tie strap holding the switch wire harness and leg latch release cable (5) to the seat leg assembly.
6. Remove the switch from the seat leg.
Third Row Seat Recliner Switch
REMOVAL
NOTE: The procedure for replacing the seat recliner switch is the same for both the 60 and 40 third row power folding seats. The following
steps should be performed only on the seat with the inoperative seat recliner switch.
1. Remove the effected third row power folding seat,See: Service and Repair/Removal and Replacement/Seat - Removal.
2. Remove the seat cushion and cover assembly,See: Seat Cushion/Service and Repair/Seat Cushion / Cover - Removal.
3. Disengage the recliner switch retaining cover (2) from the retaining tabs (5) on the switch retainer sewn into the seat cover (1).
4. Slide the switch and retaining cover assembly forward to release it from the two holding tabs (4) and lift it out of the retainer.
5. Separate the switch (3) from the switch retaining cover (2).
