Grand Caravan V6-3.3L Flex Fuel (2008)
1. With the seat back hinges (4) in the fold forward position, engage the spring arms (5) to the rear of the seat back frame (2).
2. Position the seat back hinges to the seat back frame and install the four retaining bolts (1 and 3). Tighten the bolts to 48 Nm (35 ft. lbs.).
3. Position the seat back hinge panel (4) to the seat back hinges (2) and install the four retaining screws (1 and 3). Tighten the screws securely.
4. Position the seat back panel (4) the rear of the seat back frame (3) and engage the two retaining tabs (5) that secure the top of the panel to the
frame. Make sure the tabs are fully engaged to the frame.
5. Engage the two push-pin retainers (1) that secure the bottom of the seat back panel to the seat back frame. Make sure the retainers are fully
engaged to the frame.
6. Install the seat belt and retractor assembly (2)See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Removal and
Replacement/Seat Belt and Retractor - Installation.
7. Install the seat back cushion and coverSee: Seat Back Cushion / Cover - Installation.
8. Install the seat backSee: Seat Back - Installation.
9. Install the seat into the vehicle.
2nd Row-Stow -N- Go
INSTALLATION
