Grand Caravan V6-3.3L Flex Fuel (2008)
11. If equipped with heated seats, engage the wire harness retainers (5) and install the two screws (2) that secure the electrical contact (4) to the
outboard seat riser (3). Tighten the screws securely.
12. Install the seat backSee: Seat Back/Service and Repair/Removal and Replacement/Seat Back - Installation.
13. Install the seat cushion side shieldsSee: Seat Cushion/Service and Repair/Seat Cushion Side Shields - Installation.
14. Install the seat side shieldsSee: Service and Repair/Removal and Replacement/Seat Side Shield - 2nd Row Swivel - Installation.
15. Install the seat into the vehicle.
Bench Seat - Flat Floor
INSTALLATION
1. If removed, position the riser (2) to the seat cushion frame and install the retaining bolts (5). Tighten the bolts to 48 Nm (35 ft. lbs.).
2. Position the seat track (4) onto the seat riser and install the retaining nuts (3). Tighten the nuts to 48 Nm (35 ft. lbs.).
3. Engage the seat track adjuster link wire (1) to the seat track.
4. Install the seat into the vehicle.
