Grand Caravan V6-3.3L Flex Fuel (2008)
4. Install nuts (1) on dash mounted studs. Tighten nuts to 28 Nm (21 ft. lbs.).
5. Slide booster push rod (2) onto brake pedal pin (3). Install NEW retaining clip (1) securing push rod to brake pedal.
6. Route wiring harness over pedals assembly and install routing straps (1).
7. Connect wiring connector (2) at electronic throttle control (accelerator) (3).
8. Install and adjust NEW stop lamp switch (3) in pedals assembly.See: Lighting and Horns/Brake Light Switch/Service and Repair/Installation
9. Test operation of adjustable pedals.
10. Road test vehicle testing operation of brakes and accelerator.