Grand Caravan V6-3.3L Flex Fuel (2008)
4. If equipped with adjustable pedals, install and adjust NEW stop lamp switch (2) in pedals assembly.See: Lighting and Horns/Brake Light
Switch/Service and Repair/Installation
5. If equipped with non-adjustable pedals, install and adjust NEW stop lamp switch (3) in pedals assembly.See: Lighting and Horns/Brake Light
Switch/Service and Repair/Installation
6. Connect vacuum hose to check valve on face of booster.
CAUTION: When installing master cylinder on vehicle, a NEW vacuum seal MUST be installed on master cylinder.
7. Install master cylinder.See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Master Cylinder - Installation
8. Install battery.See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery - Installation
9. Fill master cylinder with clean, fresh Mopar(R) Brake Fluid or equivalent, then bleed brakes.See: Brake Bleeding
10. Road test vehicle to ensure proper operation of brakes.
Power Brake Booster - Right-Hand-Drive
POWER BRAKE BOOSTER - RIGHT-HAND-DRIVE
