Grand Caravan V6-3.3L Flex Fuel (2008)
Camshaft: Procedures
INSPECTION
1. Check the cam lobes (4) and bearing surfaces (3) for abnormal wear and damage. Replace camshaft as required.
NOTE: If camshaft is replaced due to lobe wear or damage, always replace the lifters.
2. Measure the lobe (2) actual wear (unworn area - wear zone = actual wear) and replace camshaft if out of limit. Standard value is 0.0254 mm
(0.001 in.), wear limit is 0.254 mm (0.010 in.).