Grand Caravan V6-3.3L Flex Fuel (2008)
Drive Belt: Removal and Replacement
Accessory Drive Belt - Removal
3.3/3.8L ENGINE
1. Raise vehicle on hoist.
2. Remove the drive belt shield.
WARNING: Do not allow drive belt tensioner to snap back, as damage to tensioner and/or personal injury could result.
3. Position a wrench on the belt tensioner lug.
4. Release belt tension by rotating the tensioner clockwise.
5. Remove the drive belt.
6. Carefully return tensioner to its relaxed position.
Accessory Drive Belt - Installation
3.3/3.8L ENGINE
1. Route and position the drive belt onto all pulleys, except for the crankshaft pulley (8).
2. Rotate belt tensioner clockwise until belt can be installed onto the crankshaft pulley (8). Slowly release belt tensioner.
3. Verify belt is properly routed and engaged on all pulleys.
4. Install drive belt shield and lower vehicle.
