Grand Caravan V6-3.3L Flex Fuel (2008)
1. Position exhaust manifold (1) on cylinder head. Install bolts to center runner (cylinder #4) and initial tighten to 2.8 Nm (25 in. lbs.).
2. Using a new gasket, attach crossover pipe (1) to exhaust manifold and tighten bolts to 41 Nm (30 ft. lbs.).
NOTE: Inspect crossover pipe fasteners for damage from heat and corrosion. The cross-over bolts are made of a special stainless steel
alloy. If replacement is required, OEM bolts are highly recommended.
3. Position heat shield (2) on manifold.
4. Install the remaining manifold attaching bolts (4). Tighten all bolts to 23 Nm (200 in. lbs.).
5. Install and tighten heat shield attaching nut (3) to 12 Nm (105 in. lbs.).
6. Connect battery negative cable.
Right
INSTALLATION
1. Position exhaust manifold (5) on cylinder head and install bolts to center runner (cylinder #3) and initial tighten to 2.8 Nm (25 in. lbs.).