Grand Caravan V6-3.3L Flex Fuel (2008)
Blower Motor Resistor: Service and Repair
Installation - Rear
INSTALLATION
1. Position the rear blower motor resistor (3) into the rear heater-A/C housing (1).
2. Install the two screws (4) that secure the rear blower motor resistor to the rear heater-A/C housing. Tighten the screws to 1.2 Nm (10 in. lbs.).
3. Connect the wire harness connector (2) to the rear blower motor resistor.
4. Install the rear heater-A/C housing.
