dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Removal and Replacement|Page 8451 > < Removal and Replacement|Page 8449
Page 3
background image

5. Remove the screw (5) that secures the rear heater core tube bracket (4) to the rear heater-A/C housing (1).
6. Release the two retaining tabs (2) that secure the rear heater core and tubes (3) in the rear heater-A/C housing.
7. Carefully pull the rear heater core out of the end of the rear heater-A/C housing. If the foam seals on the heater core are deformed or damaged,

they must be replaced.

8. Disconnect the rear heater-A/C wire harness (5) from the rear blower motor resistor or power module (1) (depending on application), rear blower

motor (2), rear mode door actuator (3) and the rear blend door actuator (4).

9. Release the retaining tab that secures the connector of the rear heater-A/C wire harness to the rear heater-A/C housing and remove the wire harness

from the housing.

10. Remove the rear blower motor resistor or power module (depending on application) or.
11. Remove the rear blower motor.
12. Remove the rear mode door actuator and rear blend door actuatorSee: Air Door/Air Door Actuator / Motor/Service and Repair/Mode Door

Actuator - Removal andSee: Air Door/Air Door Actuator / Motor/Service and Repair/Blend Door Actuator - Removal.

Removal and Replacement|Page 8451 > < Removal and Replacement|Page 8449