Grand Caravan V6-3.3L Flex Fuel (2008)
Solar Sensor: Service and Repair
Sensor-Infrared
Removal
REMOVAL
NOTE: Take the proper precautions to protect the face of the overhead console from cosmetic damage during this service procedure.
NOTE: Typical overhead console shown. Infrared sensor location may vary by model.
1. Disconnect and isolate the negative battery cable.
2. Remove the front overhead console (3) and place it on a workbench.
3. Remove the screw (2) that secures the infrared sensor (1) to the back side of the overhead console and remove the sensor.
Installation
INSTALLATION
NOTE: Typical overhead console shown. Infrared sensor location may vary by model.
1. Position the infrared sensor (1) onto the back side of the front overhead console (3). Align the slot on the front of the sensor with the tab on the
console.
2. Install the screw (2) that secures the infrared sensor to the overhead console. Tighten the screw to 1.2 Nm (10 in. lbs).
3. Install the front overhead console.
4. Reconnect the negative battery cable.
