Grand Caravan V6-3.3L Flex Fuel (2008)
Fuel Gauge Sender: Service and Repair
Fuel Level Sending Unit / Sensor
Removal
REMOVAL
1. Remove fuel pump module,See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Fuel Tank - Installation.
NOTE: Mark the position of the fuel level sensor on the fuel pump module housing prior to removing. The correct position of the wires
are critical to proper operation of the fuel level sensor. Mark the position of the wire prior to removing.
2. Use a terminal removal tool and remove negative electrical wire (3) from fuel level sensor.
3. Remove positive electrical wire (4) from fuel level sensor.
4. Remove fuel level sensor retaining tabs (1) from fuel pump module housing (2).
Installation
INSTALLATION
NOTE: Correctly position the fuel level sensor to the fuel pump module housing, using the mark made during the removal procedure. Correctly
install the positive and negative electrical wire to the fuel level sensor.
1. Correctly position fuel level sensor retaining tabs (1) to fuel pump module housing (2). Press to lock the fuel level sensor into place on the fuel
pump module.
2. Install positive electrical wire (4) to fuel level sensor.
3. Install negative electrical wire (3) to fuel level sensor.
4. Install fuel pump module,See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Fuel Tank - Installation.