Grand Caravan V6-3.3L Flex Fuel (2008)
Positive Crankcase Ventilation Valve: Service and Repair
Installation
3.3, 3.8L
NOTE: The positive crankcase ventilation (PCV) valve should sit approximately 4.3 mm below the top surface of the valve cover nipple. The
valve should snap into a molded in feature at the base of the nipple. Applying a light layer of grease to the PCV valve grommet will aid in
assembly. Push the valve into place by applying a load to the top surface of the valve using a socket or handle of a hammer if necessary.
1. Install PCV valve (2) to valve cover.
2. Install PCV hose (1) to PCV valve (2).
