Grand Caravan V6-3.3L Flex Fuel (2008)
Throttle Body: Service and Repair
Throttle Body - Installation
3.3/3.8L
1. Install a new intake manifold to throttle body gasket (2), if replacement was necessary.
2. Install four new four j-nuts (1), if replacement was necessary.
CAUTION: DO NOT OVER TORQUE. Over tightening can cause damage to the throttle body, gaskets, bolts and/or the intake manifold.
3. Install throttle body (1) to intake manifold (2).
4. Install four bolts (4) and hand tighten.
5. Connect throttle body (1) electrical connector (3).
CAUTION: The throttle body must be torqued in a mandatory torque sequence. Tighten in a criss - cross pattern to specification.
6. Tighten the bolts in a mandatory torque criss - cross pattern sequence to 7.5 Nm (65 in. lbs.).