Grand Caravan V6-3.3L Flex Fuel (2008)
Ignition Coil: Service and Repair
Ignition Coil Capacitor
Removal
REMOVAL
The ignition capacitor is located on the drivers side of the engine.
1. Disconnect and isolate the negative battery cable at battery.
2. Remove electrical connector (3).
3. Remove mounting bolt (1) and ignition capacitor (2).
Installation
INSTALLATION
1. Install ignition coil capacitor (2) and bolt (1).
2. Tighten bolt to 28 Nm (20.5 ft. lbs.).
3. Connect electrical connector (3).
4. Connect negative battery cable and tighten nut to 5 Nm (45 in. lbs.).
