dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/T - 4 Speed Harsh Shifting|Page 769 > < TPM Transponder - Removal|Page 758
Page 1
background image

Control Module: Customer Interest
A/T - 4 Speed Harsh Shifting

NUMBER: 21-016-08

GROUP: Transmission

DATE: June 13, 2008

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 8.05 OR HIGHER.

StarMOBILE DESKTOP CLIENT -OR- StarMOBILE STANDALONE MODE MAY ALSO BE USED TO PERFORM THE FLASH.

SUBJECT:
Flash: 4 Speed Automatic Transmission Shift Improvements

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM).

MODELS:

2008

(RI)

Caravan/Town & Country (Includes International Models)

NOTE:

This Bulletin applies to models equipped with a 3.3L engine & 4ITE automatic transmission (Sales Code EGV with DFF) built prior to April 21,
2008 (MDH0421XX).

SYMPTOM/CONDITION:
Some customers may experience transmission shift or performance concerns as follows:

1.

1 - 2 upshift harshness.

2.

3 - 2 - 3 change mind shift with harsh shift or bump into 3rd.

a.

This may be noted on initial vehicle operation after a long soak or when transmission oil temperatures are at 10° C (50° F) or less.

DIAGNOSIS:
Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DTC's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the above symptom/condition is experienced or can be verified, perform the Repair Procedure.

PARTS REQUIRED:

A/T - 4 Speed Harsh Shifting|Page 769 > < TPM Transponder - Removal|Page 758