Grand Caravan V6-3.3L Flex Fuel (2008)
Air Bag: Description and Operation
Driver Airbag
Description
DESCRIPTION
Chrysler
Dodge
The injection molded, thermoplastic driver airbag protective trim cover (1) is the most visible part of the driver airbag. The driver airbag is located in the
center of the steering wheel, where it is secured to the armature within the hub cavity of the four-spoke steering wheel. An injection molded, bright
emblem (2) with either the Chrysler or Dodge Ram logo is applied to the center of the trim cover.
Concealed beneath the driver air bag trim cover are the folded airbag cushion, the airbag housing, the airbag inflator and the retainers that secure the
inflator to the housing. The airbag cushion, housing (3), and inflator (2) are secured within an integral receptacle molded into the back of the trim cover
(1). The vertical walls of this receptacle have numerous integral latch features that are inserted through numerous openings around the perimeter of the
airbag housing. After the trim cover latches are fully seated in the housing a blocking tab integral to the housing is bent down to block the latch feature of
the trim cover, locking the trim cover securely into place on the airbag housing. Three wire loop snap retainers (5) extend from the housing to secure the
airbag to the steering wheel armature. The snap retainer at the 6 o'clock position has a distinctive V-shape to ensure proper orientation of the airbag when
it is installed onto the steering wheel.
The airbag used in this vehicle is a multistage-type that complies with revised federal airbag standards to deploy with less force than those used in some
