dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Procedures|Page 1553 > < Procedures
Page 1
background image

Transmission Position Switch/Sensor: Removal and Replacement

Removal

REMOVAL

1. Remove valve body assembly from transaxle.See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and

Repair/Removal and Replacement/Removal.

2. Remove Transmission Range Sensor retaining screw (3) and remove sensor (1) from valve body.
3. Remove TRS (1) from manual shaft.

Installation

INSTALLATION

1. Install Transmission Range Sensor (TRS) (1) to the valve body and torque retaining screw (3) to 5 Nm (45 in. lbs.).
2. Install valve body to transaxle.See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and

Procedures|Page 1553 > < Procedures