dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Generator - Removal|Page 6602 > < Alternator|Specifications|Page 6599
Page 1
background image

Alternator: Service and Repair
Generator - Removal

3.3/3.8L

1. Disconnect and isolate negative battery cable at battery.
2. Remove generator drive beltSee: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and

Repair/Removal and Replacement/Accessory Drive Belt - Removal.

3. Unsnap plastic protective cover (1) from B+ mounting stud.
4. Remove B+ terminal mounting nut (3) and B+ terminal (2) at top of generator.
5. Disconnect field wire electrical connector (4) by pushing on connector tab.

6. Remove alternator bracket bolt (1).
7. Remove alternator bracket nut (2) and bracket (3).

8. Remove generator mounting bolts (2) and (3).
9. Remove generator (1) from vehicle.

Generator - Removal|Page 6602 > < Alternator|Specifications|Page 6599