Grand Caravan V6-3.3L Flex Fuel (2008)
NOTE: The strut clevis-to-knuckle bolts are installed differently on each side. Left hand side bolts are to be installed from vehicle rear to front.
Right side bolts are to be installed from vehicle front to rear.
13. If servicing left knuckle:
a. Position lower end of strut assembly (1) in line with upper end of knuckle, aligning mounting holes. Install two service package bolts (2). Be
sure to place bolt with eccentric cam in bottom (slotted) hole on strut clevis bracket.
b. Install a dog bone washer on the over the ends of the two mounting bolts.
c. Install service package strut clevis-to-knuckle nuts (3) on two service package bolts (2). While holding bolts in place, tighten nuts just enough
to hold steering knuckle in position when adjusting camber, but still allowing steering knuckle to move in clevis bracket when needed.
14. If servicing right knuckle:
a. Position lower end of strut assembly (1) in line with upper end of knuckle, aligning mounting holes. Install two service package bolts (2). Be
sure to place bolt with eccentric cam in bottom (slotted) hole on strut clevis bracket.
b. Install a dog bone washer on the over the ends of the two mounting bolts.
c. Install service package strut clevis-to-knuckle nuts (3) on two service package bolts (2). While holding bolts in place, tighten nuts just enough
to hold steering knuckle in position when adjusting camber, but still allowing the steering knuckle to move in clevis bracket when needed.
