Grand Caravan V6-3.3L Flex Fuel (2008)
INSTALLATION
1. Position lower control arm (2) into brackets on suspension crossmember (4).
2. Install front mounting bolt (1) and rear mounting bolt (2) and nut attaching lower control arm to crossmember. Do not tighten front bolt (1) at
this time. Tighten rear mounting bolt nut to 155 Nm (114 ft. lbs.).
3. If left side lower control arm is being serviced and vehicle is equipped with 62TE (6-speed) automatic transaxle, reinstall front and rear engine
mount thru-bolts (4 - front shown - rear similar).See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine
Mount/Service and Repair/Engine Mount - Installation
4. Install steering knuckle, brake rotor and caliper.See: Front Steering Knuckle/Service and Repair/Front Steering Knuckle - Installation
5. Install tire and wheel assembly (1)See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install
and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
6. Lower vehicle.
7. Position vehicle on alignment rack/drive-on hoist. Raise hoist as necessary to access mounting bolts.
