dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Steering Knuckle > < Front Crossmember Fore/Aft|Page 7712
Page 9
background image

24. On each side of vehicle, install tire and wheel assembly (1)See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels

- Installation. Install and tighten wheel mounting nuts (3) in proper sequence to 135 Nm (100 ft. lbs.).

25. Lower vehicle.

26. Install the screws (2) securing the ABS ICU mounting bracket (1) to the crossmember left forward support arm. Tighten the screws to 50 Nm (37

ft. lbs.).

27. Position the vehicle on alignment rack/drive-on hoist. Raise the hoist as necessary to access the lower control arm mounting bolts.

28. At curb height, tighten each lower control arm front  mounting bolt (1) to 155 Nm (114 ft. lbs.).
29. Perform wheel alignment.See: Alignment/Service and Repair

Front Steering Knuckle > < Front Crossmember Fore/Aft|Page 7712