Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Front Door Latch: Service and Repair
Installation
INSTALLATION
NOTE: The screws attaching the door latch to the door end frame have nylon patches on the threads. All screws must be replaced when the
latch has been removed.
1. Insert inside handle latch link to door latch and engage clip (Figure 1).
2. Place door latch in position on door end frame.
3. Install screws attaching door latch to door end frame. Tighten screws to 10 Nm (90 in. lbs.) torque (Figure 2).
4. Insert other linkages to door latch and engage clips.
5. Connect wire connector into power door lock motor, if equipped.
6. Insert a hex wrench through the elongated hole located in the door shut face above the latch.
7. Loosen allen head screw.
8. Pull outward on the outside door handle and release.
9. Tighten allen head screw.
10. Verify door latch and power door lock operation.
11. Install watershield and front door trim panel.
Figure 1 LATCH ASSEMBLY
