Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Sliding Door Handle: Service and Repair
Sliding Door Inside Latch Handle
Removal
REMOVAL
1. Remove sliding door trim panel.
2. Remove screws attaching bottom of inside latch handle to sliding door (Figure 1).
3. Remove two screw attaching top of inside latch handle to sliding door.
4. Remove latch handle from sliding door.
5. Disengage cable end from clip on release handle mechanism.
6. Disengage cable end from release handle mechanism.
7. Remove push pin fastener attaching cable end to release handle.
8. Disengage cable casing end from release handle (Figure 2).
9. Disengage cable end from latch handle.
10. Remove handle from vehicle.
Figure 1 SLIDING DOOR INSIDE HANDLE
