Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Figure 2 POWER LATCH POSITION & ORIENTATION
6. Disconnect all electrical connectors leading to the latch assembly.
7. Disconnect the inside and outside handle cables from the latch assembly.
8. Disconnect the hold open latch cable from the latch assembly.
9. Disconnect lock actuator link rod from the latch assembly.
10. Remove the latch assembly from the vehicle.
Installation
INSTALLATION
1. Position the latch assembly in the vehicle. Be certain all latch mounted components are installed on the replacement latch assembly. If not, transfer
components from the old latch to the new latch assembly, (Figure 1).
Figure 1 POWER LATCH POSITION & ORIENTATION
