dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engage Actuator|Page 10740 > < Engage Actuator|Page 10738
Page 2
background image

4. Install the D-pillar trim panel on the vehicle.

5. Connect the battery negative cable.

6. Using an appropriate scan tool, check any erase any power liftgate control module diagnostic trouble codes related to the door motor assembly.

7. Verify power liftgate system operation. Cycle the power liftgate through one complete open and close cycle, this will allow the power liftgate

control module to relearn its cycle with the new components.

Engage Actuator|Page 10740 > < Engage Actuator|Page 10738