dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Trunk / Liftgate Shock / Support|Removal|Page 10756 > < Trunk / Liftgate Position Sensor|Removal|Page 10751
Page 1
background image

Trunk / Liftgate Shock / Support: Service and Repair
Removal

REMOVAL

1.   Release liftgate latch and open liftgate.

2.   Support liftgate on a suitable lifting device in the full open position.

3.   Pull liftgate opening weatherstrip from D-pillar flange next to prop assembly end pivot.

4.   Remove bolt attaching end pivot to D-pillar (Figure 1).

5.   Remove bolt attaching prop assembly to liftgate.

6.   Remove prop assembly from vehicle.

Figure 1 LIFTGATE PROP ASSEMBLY

Trunk / Liftgate Shock / Support|Removal|Page 10756 > < Trunk / Liftgate Position Sensor|Removal|Page 10751