Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
10. Install first row seat belt anchor.
11. Install left D-pillar trim panel.
12. Install C-pillar trim panel.
13. Install upper left B-pillar trim on three door vehicle.
14. Install left quarter trim bolster.
15. Install front door sill plate on three door vehicle.
16. Install sliding door sill plate on four door vehicle.
17. Install second row seat, if equipped.
18. Install first row seat.
19. Connect the battery negative cable.
Removal
REMOVAL
CAUTION: Disconnect the battery negative cable. Damage to accessory feed circuit can result.
1. Remove first row seat.
2. Remove second row seat.
3. Remove sliding door sill trim panel.
4. Remove quarter trim bolster.
5. Remove D-pillar trim panel.
6. Remove first row seat belt anchor.
7. Remove second row seat belt anchor.
8. Remove screws attaching quarter trim to quarter panel from bolster area.
9. Remove screws attaching rear edge of quarter trim to attaching bracket.
10. Disengage hidden clips attaching front of quarter trim to quarter panel rearward of sliding door opening and at locators.
11. Remove quarter trim from quarter panel.
12. Disconnect speaker wire connector on LWB quarter trim panel with rear air conditioning.
13. Pass second row seat belt through slot in trim panel on long wheel base vehicle.
14. Pass first row seat belt through slot in trim panel.
15. Remove quarter trim panel from vehicle.
Installation
INSTALLATION
1. Position quarter trim panel on vehicle.
2. Pass first row seat belt through slot in trim panel.
3. Pass second row seat belt through access hole in trim panel on long wheel base vehicle.
