Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
4. Connect wire connector into speaker on LWB with rear air conditioning.
5. Align locating pins on backside of trim panel to mating holes in inner quarter panel.
6. Engage hidden clips attaching front of quarter trim to quarter panel rearward of sliding door opening and at locators.
7. Install screws attaching rear edge of quarter trim to attaching bracket.
8. Install screws attaching quarter trim to inner quarter panel in bolster area.
9. Install second row seat belt anchor on long wheel base vehicle. Tighten all seat belt bolts to 39 Nm (29 ft. lbs.) torque.
10. Install first row seat belt anchor.
11. Install D-pillar trim panel.
12. Install C-pillar trim panel.
13. Install quarter trim bolster.
14. Install sliding door sill trim panel.
15. Install second row seat, if equipped.
16. Install first row seat.
17. Connect the battery negative cable.
Removal
REMOVAL
The speaker grille in the quarter trim panel is not removable. The trim panel must be removed to service the speaker.
1. Disengage hidden clips attaching trim bolster to quarter trim panel.
2. Remove quarter trim panel from vehicle.
Installation
INSTALLATION
The speaker grille in the quarter trim bolster is not removable. The trim bolster must removed to service the speaker.
1. Place quarter trim bolster in position on vehicle.
2. Engage hook retainer attaching front of trim bolster to quarter trim panel, if applicable.
3. Engage hidden clips attaching trim bolster to quarter trim panel.
