Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Power Seat Switch: Service and Repair
Installation
INSTALLATION
1. Position the power seat switch onto the outboard seat cushion side cover.
2. Install and tighten the screws that secure the power seat switch to the inside of the outboard seat cushion side cover. Tighten the screws to 1.5 Nm
(14 in.lbs.).
3. Reconnect the power seat wire harness connector to the power seat switch connector receptacle.
4. Install the outboard seat cushion side cover.
5. Install the power seat and power recliner switch knobs onto the switch control levers.
6. Reconnect the battery negative cable.
