Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
19.
Attach the spring hook to the tip of the rear foot (Fig. 10).
20.
Attach the cable eyelet hook to the empty hook on the spring, making sure that the cable is not bent or kinked (Fig. 11).
21.
Attach the cable to the retainer at the base of the rear foot by using a screwdriver to pry into the open side of the retainer.
22.
Attach the cable end clip by prying downward with a screwdriver on the end clip after it has been located on the outboard post of the inboard leg.
Make sure that the head of the screwdriver is flush against the clip before pushing, because the clip will rotate on this post unless they are square to
each other.
23.
Insert the cable guide in the pulley holster and slide all the way down.
