dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Door Outer Belt Molding|Page 11888 > < Front Door Outer Belt Molding|Page 11886
Page 1
background image

Front Door Window Glass Weatherstrip: Service and Repair
Front Door Glass Run Weatherstrip

Removal

REMOVAL

1.   Remove door frame closeout moldings.

2.   Pull weatherstrip from glass run channel at rear of door frame, working from the bottom to the top.

3.   Disengage clip attaching weatherstrip to door frame.

4.   Pull weatherstrip from lip along top of door frame (Figure 1).

5.   Remove door trim panel.

6.   Remove door speaker, if equipped.

7.   Remove watershed as necessary to gain access to screw attaching front lower corner of glass run weatherstrip to inner door panel.

8.   Remove screw attaching glass run weatherstrip to inner door panel.

9.   Remove inner belt weatherstrip.

10.  Pull weatherstrip from front glass run channel.

11.  Remove glass run weatherstrip from vehicle.

Figure 1 FRONT DOOR WEATHERSTRIP

Front Door Outer Belt Molding|Page 11888 > < Front Door Outer Belt Molding|Page 11886