dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body - Wind Noise From L/H Or R/H Sliding Doors|Page 11908 > < Body - Wind Noise From L/H Or R/H Sliding Doors
Page 2
background image

3. Position the weatherstrip at the leading edge of the fender 1 inch above the body seam (Fig. 1).

4. Pull the red release tape at a 45 degree angle in 2 in increments firmly pressing the tape against vehicle (Fig 2).

POLICY:
Reimbursable within the provisions of the warranty.

Body - Wind Noise From L/H Or R/H Sliding Doors|Page 11908 > < Body - Wind Noise From L/H Or R/H Sliding Doors