Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Brake Drum: Service and Repair
Installation
INSTALLATION
1. Adjust brake shoe assemblies so as not to interfere with brake drum installation.
2. Install the rear brake drums on the hubs.
3. Adjust drum brake shoes as necessary.
4. Install wheel and tire assembly.
5. Tighten the wheel mounting stud nuts in proper sequence until all nuts are torqued to half specification. Then repeat the tightening sequence to the
full specified torque of 135 Nm (100 ft. lbs.).
6. Lower the vehicle.
