dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Cable - Parking Brake Front|Page 6973 > < Cable - Parking Brake Front|Page 6971
Page 1
background image

Parking Brake Cable: Service and Repair
Cable - Parking Brake Rear

Removal - Right Rear

REMOVAL - RIGHT REAR

1.   Raise and support the vehicle.
2.   Remove rear tire and wheel assembly.
3.   Remove rear brake drum from the rear wheel of the vehicle requiring service to the rear park brake cable.
4.   Create slack in the rear parking brake cables by locking out the automatic adjuster as described here. Grasp an exposed section of front parking

brake cable near the equalizer and pull down on it. At this time install a pair of locking pliers on the cable just rearward of the second body
outrigger bracket (Figure 1).

Figure 1 Locking Out Automatic Adjuster

5.   Disconnect the right rear parking brake cable from the connector on the intermediate cable (Figure 2).

Figure 2 Right Rear Cable Connection To Intermediate Cable

Cable - Parking Brake Front|Page 6973 > < Cable - Parking Brake Front|Page 6971