Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Valve Cover: Service and Repair
Cylinder Head Cover - Left
Removal
REMOVAL
1. Disconnect spark plug wires from spark plugs.
2. Disconnect crankcase vent hose from cylinder head cover.
3. Remove cylinder head cover bolts.
4. Remove cylinder head cover and gasket.
Installation
INSTALLATION
Figure 1 CYLINDER HEAD COVER GASKET
1. Clean cylinder head and cover mating surfaces. Inspect cylinder head cover surface for flatness. Replace gasket as necessary.
2. Assemble gasket to cylinder cover by inserting the fasteners through each bolt hole on cover and gasket (Figure 1).
3. Install the cylinder head cover and bolts (Figure 1).
4. Tighten cylinder head cover bolts to 12 Nm (105 in. lbs.) (Figure 1).
5. Connect crankcase vent hose.
6. Connect spark plug wires to spark plugs.
